Materials

X Over 0 3d printed black nylon choker X Over 0 3d printed steel necklaces X Over 0 3d printed sterling silver and gold-plated-brass

Our Nylon pieces are 3d printed from powdered polyamide in a process known as selective laser sintering. Each piece is polished to a satin finish. 

Our steel jewelry is 3d printed from 420 Stainless Steel. Pieces are built up from layers of steel powder in the binder jet printing process. Afterwards they are infused with bronze, which replaces the binder. They have a final composition of approximately 60% steel and 40% bronze.
 
The bronze infusion process is somewhat unpredictable. The color of each piece may vary slightly, regardless of the finish. 
Sterling Silver and Gold-Plated-Brass have a fine smooth polish with high luster. These materials are 3d printed in wax before undergoing traditional lost wax casting.
We offer Nylon in either black or white. 
Our steel jewelry is available in the following finishes:
 
- Bronze
- Dark Grey
- Gold
- Stainless

Sterling Silver is jeweler quality 925

Gold-Plated-Brass has a 0.25 micron electroplating of gold, a common standard for plated jewelry.  

Sterling Silver VS Stainless Steel 3d Printed Jewelry Close Up  Gold-Plated-Brass VS Gold Steel 3d Printed Jewelry Close Up
Sterling Silver has a fine smooth polish with high luster.
 
Stainless Steel has a subtle woodgrain-like surface texture.
Gold-Plated Brass has a fine smooth polish with high luster and has a 0.25 micron electroplating of gold.
 
Gold Steel has a subtle woodgrain-like surface texture. It has a thinner 0.01 micron plating.